Draytek P2260 2., , N , AN, LA, VL, V, 8 , .8,

VigorSwitch P2260 User’s Guide
52
Delete: Remove the existed entry of allowed group configuration
from the allowed group.
2
2. .7 7. .3 3 S St ta at ti ic c I IP P M Mu ul lt ti ic ca as st t
Function name:
Static IP Multicast
Function description:
Set static IP Multicast Group entry for IGMP snooping that you need to configure static
group membership entries on an interface. It includes IP address, VID and member port.
Parameter description:
No.: The entry number.
IP: Set Multicast groups IP addresses that are registered on this
device.
VID: Set VLAN ID for each multicast group.
Member Port: Set member ports that join each multicast group. Member
port may be only or more than one.
Add: Create a new Static IP Multicast group entry.
Edit: Modify a Static IP Multicast group entry.
Delete: Remove a static IP Multicast group entry.
2
2. .8 8 V VL LA AN N
The switch supports Tag-based VLAN (802.1q) and Port-based VLAN. Support 256 active VLANs
and VLAN ID 1~4094. VLAN configuration is used to partition your LAN into small ones as your
demand. Properly configuring it, you can gain not only improving security and increasing
performance but greatly reducing VLAN management.
2
2. .8 8. .1 1 V VL LA AN N M Mo od de e
Function name: