XDMA6540 INSTALLATION
Preparation
Please read entire manual before installation.
Before You Start
•Disconnect negative battery terminal. Consult a qualified technician for instructions.
•Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration.
Getting Started
•Remove trim ring from unit.
•Insert the supplied keys into the slots
as shown, and slide the unit out of |
|
the mounting sleeve. |
|
• Install mounting sleeve into opening, |
|
bending tabs to secure. |
|
• Connect wiring harness and |
|
antenna. Consult a qualified |
|
technician if you are unsure. |
|
• Certain vehicles may require an |
|
installation kit and/or wiring |
|
harness adapter (sold separately). |
|
• Test for correct operation and slide | Removal Keys |
into mounting sleeve to secure. | |
• Snap trim ring into place. |
|
Dashboard or Installation Kit
Head Unit
Mounting Sleeve
TYPICAL FRONT-LOAD DIN MOUNTING METHOD
2
