NORMAL OPERATION
MAIN BURNER IGNITION
Summary lighting instructions are inside the cabinet door.
mDANGER: Failure to open the lid while igniting the barbecue’s burners, or not waiting five minutes to allow the gas to clear if the barbecue does not light, may result in an explosive
ARRÊTÉ - OFF - APAGADO
2 |
|
HIGH |
|
LOW | 5 |
|
A)Open the lid (1) and make sure that all burners are in the OFF position (2).
B)Turn the cylinder on by slowly turning the cylinder valve counterclockwise (3).
m WARNING: The burner control knobs must be in the OFF |
position before turning on the LP cylinder valve (3). If |
MED
MAIN BURNER
1
they are not in the OFF position, when you turn on the LP |
cylinder valve, the “excess gas flow control” feature will |
activate, limiting the flow of gas from the LP cylinder. If this |
should occur, turn OFF the LP cylinder valve and burner |
control knobs. Start over. |
m DANGER: When the “excess gas flow control” feature |
is activated, a small amount of gas is still flowing to the |
burners. After turning off the LP cylinder valve and burner |
control knobs, wait at least five minutes for the gas to clear |
before attempting to light the grill. Failure to do so may |
result in an explosive |
bodily injury or death. |
Electronic Ignition System
Each control knob operates an individual burner, and each burner ignites with an electronic igniter. The electronic ignition system ignites each burner individually with a spark from the igniter electrode inside the ignition box. You generate the energy for the spark by pushing the electronic ignition button. You will hear it clicking.
C)Ignite the burners individually from left to right. Begin with the burner on the left (4); push control knob in and turn it to HIGH. Push and hold in the electronic ignition button (5). You will hear it clicking. Check that the left burner is lit by looking through the cooking grates. You should see a flame (6).
mWARNING: Do not lean over the open barbecue.
D1) (MODEL 3100 ONLY)
Ignite center burner (7) by pushing control knob in and turning it to HIGH. Then, push and hold in the electronic ignition button (5). You will hear it clicking. Check that the center burner is lit by looking through the cooking grates.
OR
D2) (MODEL 4100/4200)
a)Ignite
b)Next, ignite
E)Ignite right burner (10) by pushing control knob in and turning it to HIGH. Push and hold in the electronic ignition button (5). You will hear it clicking. Confirm that the right burner is lit by looking through the cooking grates.
mWARNING: Each burner must be ignited individually by pushing the electronic ignition button. Failure to do so may cause a
mWARNING: If any burner fails to ignite during lighting, within five seconds, stop, turn the burner control knob to OFF and wait five minutes to allow the gas to clear before you try again or light with a match.
6
2
5 |
4 | 7 |
|
|
| 10 |
| |
|
| 3 | |
3100 |
|
| |
|
|
|
1
6 2
5 |
4 | 8 | 9 | 10 |
|
|
| 3 | ||
|
|
| ||
4100/4200 |
|
|
| |
|
|
|
|
|
|
28 | www.ducane.com |