Dynalink RTA770W user manual Enable 802.1x authentication and Encryption for wireless card

Appendix B: Server Setup for 802.1x Client

Enable 802.1x authentication and Encryption for wireless card

1.Open up the properties for your wireless connection, either by

Right-click on My Network Places on the desktop, select Properties, or Open up the Control Panel, select Network Connections (located under Network and Internet Connections if in Category View)

2.Right Click on the Wireless Network Connection, and select Properties.

3.Select the Authentication Tab, and ensure that Enable network access control using IEEE 802.1X is selected, and Smart Card or other Certificate is selected from the EAP type.

4.Click on the Wireless Networks tab.

5.Select the wireless network on which you want to enable dynamic WEP from under Available Networks, and select Configure.

97