ADSL Router User Manaul
Bridging
If the type you choose is Bridging, please refer to the following information.
The bridging mode can configure your router to send packets received on any port such as ATM PVC or Ethernet with a broadcast MAC address to all other ports.
Choose Bridging and click Next.
Primary IP Address:
Type in the IP address that you got from your ISP for LAN interface.
Subnet Mask:
Type in the subnet mask that you got from your ISP for LAN interface.
You can modify them if needed. Click Next for next step.
You can check it at this time. If you find something is incorrect, click Back to change the settings. If everything is OK, click Finish to accept these settings. And the following page will appear.
Now, the system will reboot to activate the new settings that you have done in this section.
Please wait for 2 minutes for restarting the router.
32
