Olicom 9600 manual General Compressor Operating Specifications

9600 Compressor Installation, Operation, and Maintenance

General

CTI-CRYOGENICS

HELIX TECHNOLOGY CORPORATION

The information in Table 1-4 provides general Compressor operating specifications.

Table 1-4: General Compressor Operating Specifications

Specification		Values
Part Numbers
Input Power Cable		600 VAC
(Customer Supplied)		10 Gauge, 3 conductor wire with ground
		Must conform to local electrical codes
Nominal Helium Pressure		Refer to Table 4-1
Ambient Operating		50 - 100º F (10 - 38º C)
Temperature Range
Interface		Cryopump Power Receptacles: mates with the
		CTI-CRYOGENICS supplied cryopump power cable for
		single pump use.
		Mates with remote junction box power cable for multiple
		cryopump use.
Gas Supply Connector		1/2 in. Aeroquip self-sealing coupling
Gas Return Connector		1/2 in. Aeroquip self-sealing coupling
Remote Control Receptacle		24VAC, 2.7A inductive mates with P5 connector P/N
		MS3106A*
Adsorber Service Schedule		3 Years
	* Supplied by CTI-CRYOGENICS

NOTE: The 9600 Compressor is designed for continuous operation and should remain ON when the cryopumps are in a regeneration cycle.

P/N 8040540 1-7