Dynalink RTA770W Numbered IP over ATM IPoA, WAN IP Address WAN Subnet Mask Primary DNS server

Models: RTA770W RTA770

1 110
Download 110 pages 42.57 Kb
Page 87
Image 87
Numbered IP over ATM (IPoA)

Chapter 5:Connection Mode

Numbered IP over ATM (IPoA)

 

 

 

Default Private IP

 

 

 

192.168.1.1

ISP

STM-1

Loop

 

10.3.75.51

(Internet Service Provider)

 

10.3.75.49

 

 

10.3.70.1

S/W

 

BRAS

DSLAM

ADSL

Hub

AAA

Router

 

 

 

 

 

 

 

10.3.75.50

RDAIUS

 

 

 

 

 

 

PC(S)

Server

 

 

 

 

 

 

 

*BRAS: Broadband

 

IP over ATM

 

 

 

 

 

Remote Access Server

Public IP Pre-assigned

 

 

 

 

 

by ISP

 

 

Description:

If you apply for multiple IP addresses from your ISP, you can assign these public IP addresses to the ADSL Router and public server, e.g., Web or FTP server. Typically the first IP is network address, the second is used as router IP address and the last one is subnet broadcasting. Other remaining IP addresses can be assigned to PCs on the LAN.

The following example uses the LAN IP address ranging from 10.3.75.49 to 10.3.75.54 and the subnet mask for LAN is 255.255.255.248. The WAN address is 10.3.70.1, and the subnet mask for WAN is 255.255.255.252.

Configuration:

1.Start up your browser and type 192.168.1.1 as the address to enter this ADSL web-based manager.

2.Go to Quick Setup. Type in the VCI and VPI value. Then click the Next button.

VPI – 0 VCI – 32

3.On the Configure Internet Connection -Connection Type page, select the IP over ATM (IPoA) then click the Next button.

4.In the WAN IP Settings page, select Use the following IP address and type in the IP address, subnet mask and gateway that you got from ISP. Then, select Use the following DNS Server Address. Type in the Primary DNS server and Secondary DNS server. Click Next for next page.

WAN IP Address: 10.3.70.1

WAN Subnet Mask: 255.255.255.252

Primary DNS server: 168.95.1.1

Secondary DNS server: 168.95.192.1

5.In the Configure LAN side Settings page, type in the IP address and subnet mask for your LAN.

Primary IP Address: 192.168.1.1

Subnet mask: 255.255.255.0

Start IP Address: 192.168.1.2

End IP Address: 192.168.1.254

6.Check Configure the second IP Address and Subnet Mask for LAN Interface and type in the second IP address and subnet mask. Then click Next.

Secondary IP Address: 10.3.75.49

Subnet mask: 255.255.255.248

7.Check the network information. Make sure the settings match the settings provided by ISP.

75

Page 87
Image 87
Dynalink RTA770W Numbered IP over ATM IPoA, WAN IP Address WAN Subnet Mask Primary DNS server, Description, Configuration