4.Power LED: Indicates if the unit has power and is operating correctly. A blinking LED indicates the unit is loading the firmware and configuration, while a solid LED indicates the unit is ready for operation. This LED will be green.
Positioning Your Modem
Your XOHM Modem has a convenient, contemporary design that allows for simple setup. When setting up your modem:
Only use your XOHM Modem indoors. Avoid moisture or extreme temperatures.
For improved reception, place the modem near a closed window.
Position the modem within easy access of a reliable power supply.
Make sure the modem is near enough to your
computer to easily connect the modem to the computer using the supplied Ethernet cable.
The unit’s omnidirectional antennas are built into the sides (“handles”) of the modem case.
Make sure to provide ample space around the device to ensure maximum WiMAX signals.
The antennas must be installed to provide a
separation distance of at least 20cm from all persons to satisfy Federal Communications Commission radio frequency exposure compliance.
Where possible, keep your modem at least one foot away from other electronic devices,
such as | 5dBi Omnidirectional Antennas |
to avoid potential signal interference. |
|
6Your XOHM Modem
