3.Plug in the modem and connect it to your computer.

Insert the round end of the power adapter into the modem’s power port and plug the other end into a power source. (The Power LED should illuminate.)

Insert one end of the supplied Ethernet cable to your computer and the other end into the yellow LAN 1 port. (The LAN 1 LED should illuminate.)

4.Check the modem’s indicator lights to confirm your WiMAX signal. It may take a few moments for the signal to find your modem.

If the WiMAX Signal indicator is solid green, the modem is receiving a WiMAX signal. Proceed to step 5.

If the WiMAX Signal indicator is blinking, try moving the modem to a different location (nearer a window or away from other electronics). Wait several seconds at each location to see if you’re getting a signal.

If you cannot acquire a WiMAX signal, call XOHM Care at 877-333-XOHM(9646).

WiMAX

LAN 1

Power

Signal

 

 

Tip

For more information about signal strength, see “XOHM WiMAX Signal Strength” on page 20.

22 Alternate Method: Install Without the Modem Setup Assistant

Page 30
Image 30
Sprint Nextel MAX-206M2 manual Tip