Dynalink RTA770W user manual For Windows ME, Configuration

Chapter 3: Configuration

For Windows ME

1.Click on the Start menu, point to Settings and click on Control Panel.

2.Double-click the Network icon.

3.The Network window appears. On the Configuration tab, check out the list of installed network components.

Option 1: If you have no TCP/IP protocol, click Add.

Option 2: If you have TCP/IP protocol, go to Step 6.

4.Highlight Protocol and click Add.

5.On the left side of the windows, highlight Microsoft and then select TCP/IP on the right side. Then click OK.

6.While returning to Network window, highlight TCP/IP protocol for your NIC and click Properties.

7.On the IP Address tab, select Specify an IP address. Enter the IP address: 192.168.1.x (x is between 2 and 254), Subnet Mask: 255.255.255.0 and Default gateway: 192.168.1.1. Then click OK.

8.While returning to the Network window, click OK.

11