ADSL Router User Manaul
PPP over ATM/ PPP over Ethernet
If the type you choose is PPP over ATM or PPP over Ethernet, please refer to the following information.
According to the ISP’s configuration on the server, you can choose PPPoE and PPPoA modes.
Choose PPPoA or PPPoE and click Next.
In this screen, you have to choose the settings for WAN IP. To get the IP address automatically, click the Obtain an IP address automatically radio button. Or click Use the following IP address button and enter the IP address for WAN interface.
Click Enable NAT if you want.
Click Next for next screen.
PPP Username:
Type in the username that you got from your ISP.
PPP Password:
Type in the password that you got from your ISP.
Always On:
Check this button to make the connection is always active.
Dial on Demand:
Click this button to make a connection while in demand. Enter the timeout to cut off the network connection if there is no activity for this router.
Manually Connect:
Click this button to make a connection by pressing the Connect button on the Advanced Setup- WAN - Internet web page.
PPP IP extension:
Check this box to invoke the PPP IP extension. When you check this box, only one user is allowed to access into the web page for configuration at one time.
Please type the username and password that you got from your ISP. Then click Next.
26
