Product features

7

 

 

 

#

Component

Description

 

 

 

3

Security Sync button

Push and hold this button for three seconds, then initiate the Security Sync (WPS)

 

 

procedure on the client device within two minutes. Your client will automatically

 

 

exchange the security information and be added to your wireless network. Pushing

 

 

the Security Sync button will automatically enable WPS. See “Using Security Sync

 

 

(Wi-Fi Protected Setup)” on page 28.

 

 

 

4

Security Sync LED

Lights to indicate that WPS has been activated.

 

 

Blinking Green—The router is searching for a WPS client to connect with.

 

 

Solid Green—The secure connection has been established with the client.

 

 

 

4

Wireless network LED

Off—The wireless network is off

 

 

Solid Green—The wireless network is ready

 

 

Blinking Green—Network activity

 

 

 

5

Internet LED

This unique LED shows you when the router is connected to the Internet. When the

 

 

light is OFF, the router is not connected to the Internet. When the light is blinking,

 

 

the router is attempting to connect to the Internet. When the light is solid green, the

 

 

router is connected to the Internet. When using the “Disconnect after x minutes”

 

 

feature, this LED becomes extremely useful in monitoring the status of your router's

 

 

connection.

 

 

Off—Router is not connected to the Internet

 

 

Blinking Green—Router is attempting to connect to the Internet

 

 

Solid Green—Router is connected to the Internet

 

 

 

6

Modem status LED

This LED lights green to indicate that your modem is connected properly to the

 

 

router. It blinks rapidly when information is being sent over the port between the

 

 

router and the modem.

 

 

Off—No WAN link

 

 

Solid Green—Good WAN link

 

 

Blinking Green—WAN activity

 

 

 

7

Wired computer

These LEDs are labeled 1-4 and correspond to the numbered ports on the rear of the

 

status LEDs

router. When a computer is properly connected to one of the wired computer ports

 

 

on the rear of the router, the LED will light. green means a 10Base-T device is

 

 

connected, orange means a 100Base-T device is connected. When information is

 

 

being sent over the port, the LED blinks rapidly.

 

 

Off—The wireless network is off

 

 

Solid Green—A 10base-T device is connected

 

 

Solid Orange—A 100base-T device is connected

 

 

Blinking—Port activity