sonar signal cone, the image appears on the screen as a long line in- stead of a fish arch. Reducing the chart speed may result in a shorter line that more closely resembles a regular fish return.
To adjust Chart Speed, repeatedly press MENU until the CHART SPEED scroll bar appears. Press ↑ to increase the speed of the chart. Press ↓ to decrease it. Press PWR to clear the menu.
To return to the original setting, repeat the steps above, but use ↑ to set the speed to 100% before clearing the menu.
Frequency
The FishEasy 250 DS has a Dual Search transducer that can transmit signals at 83 kHz and 200 kHz. The SeaFinder 250 DF is packed with a Dual Frequency transducer that transmits at 50 kHz and 200 kHz.
The 200 kHz signal is best used in shallow water (about 300 feet or less). This frequency is the best choice for about 80 percent of the fresh and salt water sport fishing applications. When you get into very deep salt water, up to 1,000 feet, the 83 kHz or 50kHz frequencies will work best.
The 200 kHz transducer offers better detail and definition, but less depth penetration. With the 83 kHz or 50 kHz frequencies, you will not get as much detail or definition, but will benefit from greater depth penetration. The 83 kHz also has up to 120° of wide
43
