Eagle Electronics 500C, 500CDF manual Pages Menu, showing some Map display options

Timers command: controls the up timer, down timer and alarm clock settings.

Browse MMC Files command: this allows you to view the installed MMC card and the files it contains.

Pages

The unit has four Page displays that represent the four major operating modes. They are the Satellite Status Page, the Navigation Page, Map Page and the Sonar Page. They are accessed by pressing the PAGES key, then using → or ← to select a Page. (Clear the Pages Menu by pressing EXIT.)

Pages Menu, showing some Map display options.

Sonar Page

The Sonar Page displays the sonar chart, a view of the water column from the surface to the bottom. The chart scrolls across the screen from right to left, displaying signal echoes that represent fish, structure and the bottom. The Sonar Page is discussed in detail in Sec. 3. To get to the Sonar Page: Press the PAGES key, then use → or ← to select SONAR. (Clear the Pages Menu by pressing EXIT.)

Satellite Status Page

The Satellite Status Page, shown in the following images, provides de- tailed information on the status of the unit's satellite lock-on and posi- tion acquisition. To get to the Satellite Status Page: Press the PAGES key, then use → or ← to select STAT. (Clear the Pages Menu by pressing EXIT.)

No matter what Page you are on, a flashing current position indica- tor/question mark symbol and flashing GPS data displays indicate that satellite lock has been lost and there is no position confirmed. The Sat- ellite Status Page shows you the quality and accuracy of the current satellite lock-on and position calculation.

94