Eagle Electronics 500C, 500CDF manual To change displayed data font size, Steering arrow

1.Press MENU↓ to OVERLAY DATAENT.

2.You'll see a list of the overlay data currently displayed. Select the item you want to move and press ENT→ to MOVEENT.

3.The data begins to flash on your screen. Use any combination of →, ←, ↑ and ↓ to move the data to a new location on the screen.

4.When satisfied, press EXITEXIT.

NOTE:

The Customize command and the Overlay Data command both use the same information categories. The difference between the two commands is that Customize changes only the data boxes on a screen, and Overlay Data changes only the information floating on the screen without a box. See Customize Page Displays, on page 145, for information on customizing data boxes.

To change displayed data font size:

1.Press MENU↓ to OVERLAY DATAENT.

2.Press ↓ or ↑ to select Data Typepress → or ← to Data Size. The se- lected data type will be displayed in the new size.

To change the font size of another data type, repeat the instructions in Step 2.

3.After the desired changes are made, end the command and return to the previous page by pressing EXIT.

Steering arrow

At left, Map Page showing boat cruising Puget Sound, Washington, with Overlay Data turned on. This example shows Depth, Ground Speed and the Steering Arrow. Note the Steering Arrow always points directly to the destination you are navigating toward. Right, the ex- ample shows Depth, Ground Speed and the Track the boat is following.

71