Eagle Electronics 500C, 500CDF manual Stop Chart, Press MENUMENU↓ to Browse MMC Filesentent

this section on Log Sonar Chart Data.) To play back your own sonar chart, make sure the MMC containing the chart is installed, then:

1.Press MENUMENU↓ to SONAR SETUPENT↓ to SONAR SIMULATORENT.

2.Press ↓ to CHART USEDENT.

3.Press ↓ or ↑ to select chart nameENT↑ to SONAR SIMULATOR

ONENTEXIT.

While you're in the Sonar Simulator menu, don't forget to check Simulate Position if you want to run the sonar and GPS simulators simultaneously. As you review sonar logs, you can create waypoints to mark sites you want to return to.

While the simulator is running, you can switch from one chart log to another by opening the Sonar Simulator menu and using the in- structions in step 2 to select a different chart.

Tip:

There's more than one way to play a recorded sonar chart. You can also turn on the simulator from the MMC files list. Here's how:

1.Press MENUMENU↓ to BROWSE MMC FILESENTENT.

2.Press ↓ or ↑ to chart nameENT↓ to PLAYENTEXIT.

NOTE:

For some great practice, try running the Sonar Simulator and the GPS Simulator at the same time. This will really give you a feel for how the unit will work in the field.

NOTE:

If you turn on your unit before attaching a transducer, it may enter a demo mode. The words demo mode flash on the bottom of the screen and a sonar chart plays much like the simulator. Unlike the simula- tor, the demo mode is for demonstration only, and will automatically stop as soon as you turn on the unit with a transducer attached. The simulator will continue to function normally.

Stop Chart

If you are running multiple units on a boat or using this unit in a car, there are times when you may want to turn off the sonar. This com- mand turns off the sonar and stops the chart from scrolling. Sonar re- starts automatically each time you turn on your unit.

From the Sonar Page press MENU↓ to STOP CHARTENTEXIT.

83