Eagle Electronics 500C, 500CDF manual Title bar with chart file name Play symbol flashing

At left, Main Menu with Sonar Setup command selected. Center, sub- menu with Sonar Simulator command selected. At right, Sonar Simu- lator menu, with simulator turned off (check box is unchecked).

NOTE:

With Simulate Position checked, the simulator will also automatically run the GPS simulator (if GPS data was recorded with the sonar log).

2.To use the default sonar chart log stored in the unit, press ENTEXIT. The recorded chart begins scrolling across the screen, just as if you were on the water.

3.Turn off Sonar Simulator by pressing MENUMENU↓ to SONAR

SETUPENT↓ to SONAR SIMULATORENTENTEXIT.

Title bar with chart file name

Play symbol flashing

Sonar Page, playing a recorded sonar chart in Sonar Simulator mode.

Tip:

The Sonar Simulator can use sonar charts that you or a friend has recorded (logged) on an MMC card. (To see how, read the entry in

82