Eagle Electronics 500C, 500CDF manual Visible Active Symbol

Visible

Active

symbol

symbol

Sequence for saving a trail and beginning a new one. At left, My Trails command. Center, the Trails Menu. The arrow to the right of Trail 3 indicates the trail is "active," and the check to the left indicates the trail is visible on the map display. The right figure shows the Edit Trail menu, with the Name command selected.

2.Press ↓ to the Active Trail NameENT.

3.Press ↓ to ACTIVEENT. This unchecks the Active option.

4.To return to the previous page, press EXITEXITEXITEXIT. As you leave the Edit Trail menu, you will notice that a new trail starts with a new sequential number. In the example figure below, the new trail is number 4, showing zero points. Note that Trail 3 is inactive, but it is still visible on the map.

New trail, named "Trail 4," is created when Trail 3 is made inactive. Any new travel will be recorded in this trail, which is active and visi- ble. Trails do not need to be visible in order to be active.

You can save and recall up to 10 different plot trails, which can also be

116