Eagle Electronics 500C, 500CDF manual Navigate a Route in Reverse

2.Press ↓ to select route nameENTENT.

3.Upon arrival at your destination, cancel navigation:

press MENUMENU↓ to CANCEL NAVIGATIONENT← to YESENT.

The following figures show what the Navigation Page and Map Page look like while navigating a route.

Navigate a Route in Reverse

Here's how you run a route backward, from the end waypoint to the beginning waypoint:

1.From the NAVIGATION PAGE, press MENUENT or from the MAP PAGE, press MENUMENU↓ to ROUTE PLANNINGENT.

2.Press ↓ to select route nameENT→ to REVERSE ROUTEENT← to

NAVIGATE ROUTEENT.

3. Upon arrival at your destination, cancel navigation:

press MENUMENU↓ to CANCEL NAVIGATIONENT← to YESENT.

Figure 1. Figure 2.

Navigating along a route: Fig. 1 shows the Navigation Page at the start of a route, heading straight for the first waypoint (Wpt 1). In Fig. 2, the traveler has arrived at Wpt 1; the arrival alarm has been triggered and the bearing arrow on the compass rose has turned to point toward Wpt 2, off to the northeast.

133