Edimax Technology NVR-4 instruction

DHCP: This NVR will allocate an IP address automatically from your DHCP server on local network.

Static IP: Input the IP address information manually; please assign a unique IP address on your network. DNS1 and DNS2 are optional, but some network functionalities will not work if both fields are blank. Input at least DNS1 when possible.

Start UPnP: Start UPnP function and computers capable to locate UPnP resources on network can discover this NVR automatically.

Network Type: PPPoE The PPPoE cannot be selected under Wizard mode.

When you finish with above settings, click ‘Next’ button to continue:

In this screen, you can locate all compatible IP cameras on the local network. Click ‘Auto Search’ to start locating IP cameras, you can click this button more than one time if not all IP cameras are found.

In this example, an IP camera named ‘CAMER-1’ which model is ‘NC-213’ has been found:

Please note that this function is only capable to locate IP cameras on local network. For cameras on Internet, please setup them manually.

Click ‘Next’ button to continue when all IP cameras you wish to connect are found.

In this screen, you can configure hard drive(s) as your video storage space. In this example, there is only one hard drive found on NVR:

20

Image 21

Edimax Technology NVR-4 manual

Contents

Page Copyright Contents Account Management Chapter I Introduction Features Package Contents Flash Accessing USB device Flash Accessing hard driveIcon 2 Accessing HDD Flash Transferring network data Hole to reset the NVR Page Hold the HDD enclosure and pull it out Page Page Page Page Locating the NVR’s IP Address Chapter II Using the NVR WEB Interface Accessing the Web Interface Page Page Time Setup menu Pan & Tilt Will become inaccurate when you need to review themWill happen when you try to control pan and tilt on these To view from all of the cameras. To get the camera’s IPPage Page Page Page Patient Username Input the login user name of IP cameraSearch results will be displayed as follows Not adding any camera To discard all settings and go back Password Input the login password of IP cameraCan change settings and click ‘Apply’ to apply new settings Model Select the IP camera’s model from dropdown menu Camera, this field will look like this Start LAN It’s recommended to check this box to enable UPnP IP address, please consult your network administratorDdns service provider first Places like from Internet, you can leave this field blankPage Page When recording limit is reached see below Please note that you need to switch IP camera’s motionFrom dropdown menu here SpacePage Page Page Page Calendar icon Calendar will appear Video file is found, the search window will look like this Dropdown menu to select hour and minutePage Hostname Computer Time Time setting Synchronize withNVR on network Some network servers and computers can Discover NVR’s hostname you set here Prompted to confirm factory reset ResetUpdate Update procedure Not use standard port number FTP Email sender in all outgoing E-mail Enable Email notification functionalityLeave this field blank if you only have one E-mail address Know if you need to check this box User Management Administrator Description User Description Input administrator’s new password again for confirmation Page Description Chapter III CMS Lite Page Page Page Page Page Page Page Page Page Page Page Page Status Collecting Steps Real time video Page-next/page-previous Switchover of displayed video cameraPage Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page System Setup System information Page Video Playback Page Page Page Page Buttons Reset / Power on/off LEDs Camera, you must use manual configurationUSB Indicator Recording Mode Recording Frame Rate Fps at H.264 Export File Format Resolution Up to 3Megapixel Mobile Device Live ViewYes CMS Lite Log Yes Remote Management FCC Caution Federal Communication Commission Interference Statement