| working properly. |
|
|
Reset | Clear all settings of NVR and reset to factory default settings. You’ll be |
| prompted to confirm factory reset. |
|
|
Shutdown | Shutdown NVR. When you want to remove the power supply or add / |
| remove hard drive from NVR, please use this function or the data saved |
| on hard drive may corrupt and not be able to use again. |
|
|
Browse | Select a firmware file on your computer for firmware update. You’ll be |
| prompted to select a firmware file on your computer’s hard drive. |
| Please note: Use wired network connection to transfer firmware file, |
| refrain from using wireless network connection. Incomplete or corrupt |
| firmware file will cause problem to this NVR and makes it become |
| unusable. |
|
|
Update | After you selected a firmware file, you can click this button to update |
| the NVR’s firmware file. Please follow the instructions to complete |
| update procedure. |
| Firmware update requires few minutes to complete, please be patient. |
|
|
2.9.3 “Config Backup” Settings
You can backup and restore NVR’s configuration file here. This function is handy when you have many NVRs and their configuration is similar.
Item | Description |
|
|
Backup Config File | Save NVR’s configuration to your computer. You will be |
| prompted to select a folder on your computer to save the file. |
|
|
Restore Config File | Pick a saved configuration file from your computer and apply to |
| NVR. Click ‘Browse’ button to select the file. |
|
|
After you select ‘Backup’ or ‘Restore’, click ‘Apply’ button to begin backup or restore procedure.
39
