| places (like from Internet), you can leave this field blank. |
| DNS1: Please input the IP address of DNS server. If you don’t know its |
| IP address, please consult your network administrator. |
| DNS2: Input backup DNS server’s IP address here. You can leave this |
| field blank if you have only one DNS server. |
|
|
Start UPnP | Check this box and this NVR will start UPnP service, so computers that |
| are compatible with UPnP can discover the presence of NVR and get |
| connected. |
| It’s recommended to check this box to enable UPnP. |
|
|
PPPoE | Select this item to use PPPoE to connect to network. |
| Username: Please input PPPoE username. |
| Password: Please input PPPoE password. |
|
|
HTTP Port | Input HTTP port number. Please note that if you changed HTTP port |
| setting here, you have to use the “address:port” format to connect to |
| NVR by web browser. |
| For example, if you changed HTTP port to 8080, and NVR’s IP address is |
| 192.168.2.5, please input ‘http://192.168.2.5:8080’ in browser’s |
| address bar. |
|
|
RTSP Port | Input NVR’s RTSP port number. It is recommended to leave this setting |
| untouched unless required. |
|
|
Enable DDNS | Check this box to enable DDNS (Dynamic DNS) function. This function |
| will help you to locate your NVR on Internet by host name. |
| Before you use this function, please register an account from one of |
| DDNS service provider first: |
| www.dyndns.org or www.tzo.com |
|
|
27
