Edirol R-4Pro The Mixer screen

19

Introducing the R-4 Pro

From the Main screen, you can press the [DISPLAY] button to switch the progress bar area so it shows the

remaining project time (REM: REMAIN).

fig.play-disp2.eps

The Mixer screen

From the Main screen, press the [DISPLAY] button twice to show to the Mixer screen.

This screen lets you adjust the volume balance for monitoring.

fig.play-disp3.eps

Marker display

The number on the left is the number of marker located immediately before

the current time counter value. The number on the right indicates the total

number of markers assigned in the currently selected project.

E indicates the end of the current project.

Monitor level meters These are the output level meters. The output level assigned to the L/R chan-

nels of the monitor is displayed as the final output level after mixing the L and

R channels separately. You can adjust the level of each channel with the chan-

nel level sliders from the mixer screen. The level meter is calibrated at -36, -20,

-12, -6, and -3 dBFS from the left.

Clip level indicators

Power source

Displays the power supply source for the R-4 Pro. When power is supplied via

the AC adapter, a power plug icon is shown; when power is supplied via bat-

teries or an external power supply device (see p. 29), a battery icon is dis-

played.

Date and time or timecode

Displays the current date and time or the timecode.

To change the display, see Connecting to a video device with a time-

code port (p. 84)

Remaining time During playback, this displays the remaining time from the current location

to the end of the project.

Channel level sliders

These levers adjust the playback level for each channel. Use the left/right

[CURSOR/FINDER] buttons to select a slider, and turn the [SCRUB/VALUE]

dial to adjust the value. Each slider can be adjusted within the range 0–120.

The default value is 100.

* The settings are stored by the R-4 Pro and not in the project. When you

turn off the power, the settings revert to the default value.

* These settings do not affect the recording levels.

Remaining time

Channel names

Channel level meters

Channel level

sliders

Monitor level meters

Output assignments

R-4_e_new.book 19 ページ２００６年１１月２０日　月曜日　午後１時９分

Contents

Main Information 04450201 06-12-2N NORTH AMERICA EUROPE As of November 1, 2006 (EDIROL-2) Apparatus containing Lithium batteries ADVARSEL! VARNING CAUTION ADVARSEL Page Page Important Notes Power Supply: Use of Batteries Placement Maintenance Additional Precautions Handling Hard Disks Important Performance and Image Data Precautions Regarding Setup and Use Emergency Procedures Copyright Contents Checking the included items Introducing the R-4 Pro Internal mics [MIC-L, MIC-R] Internal speakers Power switch [POWER] The R-4 Pros controls and connectors Hold switch [HOLD] Phantom power switches [PHANTOM POWER] Limiter switch [LIMITER] Wave edit button [WAVE EDIT] Effect button [EFFECTS] System button [SYSTEM] Marker [MARKER] A-B Repeat button [A-B REPEAT] Cursor/Monitor Select buttons [CURSOR/MONITOR SELECT] Exit button [EXIT] Enter/Finder button [ENTER/FINDER] Scrub dial [SCRUB/VALUE] Shuttle dial [SHUTTLE] Front panel Power connector [DC IN] Digital output connector [DIGITAL OUT] Digital input connector [DIGITAL IN] USB Storage connector [STORAGE ONLY] Side panel (left) Headphone jack [PHONES] Grounding terminal XLR input connectors 14 Line output jacks [LINE OUT] Side panel (right) Battery compartment Bottom panel The Main screen Display While playing or stopped The Mixer screen The Main screen While recording Page Monaural projects What is a project? ABC-4.pjt MONOx4 MONOx2 Project Name Project Name BC-5.wav STEREOx2 ABC-6.pjt 4CH Getting ready to use the R-4 Pro R-4_e_new.book 24 921 Dynamic mic/Condenser mic For more about connections, refer to both Recording (p. 30) and Playing back (p. 37). Connecting the AC adapter and turning the power on/off Turning on the power 1 2 3 4 Turning off the power Installing batteries and turning on the power Getting ready to use the R-4 Pro Caution when using battery power on the R-4 Pro Getting ready to use the R-4 Pro Battery life Battery status Using external power sources Setting final voltage 2 3 4 Recording Connections Phantom power switch Limiter Recording from a connected mic sensitivity/Input level knobs Adjusting the input level 1. 2. 3. 4. 5. Caution regarding placement and handling while recording Phantom power switch Recording from the internal mics 1. 2. 3. 4. Connections 1. 2. 3. 4. Recording digital audio from a digital device Limiter Simultaneously recording sound from connected mics and a digital device Simultaneously recording sound from connected external mics and the internal mics Microp h one Playing back Connections before playback Connecting headphones Connecting amplified speakers Connecting a mixer or other analog device (analog connection: line output jacks) Page 2 3 Setup before playback Player Setup 2 press the [ENTER] button. Speaker 1 2 3 Playing back Normal playback 1 you want to assign a marker. 2 Markers 1 2 button stays lit, and that location becomes the end point (B) for repeat playback. Repeat playback (A-B REPEAT) Please note Finder functions Selecting a project (Select) 1 2 3 Deleting a project (Delete) 1 2 3 4 Renaming a project (Rename) 1 2 3 4 Copying a project (Copy) 1 2 3 4 Moving a project (Move) 1 2 3 4 Creating a new folder (Make Folder) 1 2 3 4 5 Editing 1 Menu screen is shown in the display. 2 [ENTER] button. 4 5 6 1 2 Divide 5 1 2 3 4 Combine 5 Editing 1 Menu screen is shown. 2 Merge Edit Timecode 1 2 3 4 Effects settings Effect types provided on the R-4 Pro 1 2 3 Applying effects 4 5 6 7 8 Effects Effects settings 4: Enhancer 5: Comp&DeEsser 6: MS-Mic System setup 2 3 4 5 6 Example operations Recording Setup settings Timecode settings Date & Time settings 2 3 4 2 Project Name settings Using the HDD Utility 2 3 4 5 Using the USB Storage Utility Executing Factory Reset (Restoring the factory default settings) 2 3 4 5 System Menu 1 Recording Setup Page Page 2 Player Setup 3 Speaker 4 LCD Setup 5 System Setup 6 Timecode 7 Date & Time 8 Project Name 9 HDD Utility 10 USB Storage Utility 11 Factory Reset Appendix Connection 1 ONLY] port. 2 Removal 1 2 1. 2. Formatting an external memory device 3. 4. 5. 3 Connecting to a computer Connecting the R-4 Pro to your computer Windows 1 2 Disconnecting the R-4 Pro from a computer 2 press the [ENTER] button. Connecting to a video device with a timecode port Setting timecode 3 4 5 6 7 8 Setting the start time Setting the internal timecode start time 2 3 4 Synchronize to an external timecode source Setting the REC-RUN timecode start time 2 3 4 5 Application guide Connecting an external mic for CD-quality stereo recording LCD Setup System Setup Recording birdsongs outdoors System Setup Recording audio while filming video Recording audio memos using just the R-4 Pro Simultaneously recording environmental sounds (ambience) Simultaneously recording at different input levels Recording comments simultaneously Messages Troubleshooting Computer-related problems Recording-related problems Troubleshooting Pan (stereo image) is not stored correctly Even though the recording levels are set, the sound is distorted when an effect is turned on The HDD Slow! message is shown Playback-related problems Problems with the R-4 Pro operation Main specifications Recorder Audio Input and Output Main specifications USB Interface Other Input/Output Part Effect Unit Part Control Others Block diagram Index Numerics A B C I J L M N R S T U W Page Page To resize thickness, move all items on the front cover This product complies with the requirements of European Directive 89/336/EEC. For the U.K. Apparatus containing Lithium batteries ADVARSEL! VARNING CAUTION ADVARSEL Information 04450201 06-12-2N NORTH AMERICA EUROPE As of November 1, 2006 (EDIROL-2)