93
Application guide
You can use this feature to record four channels simultaneously. You can use channels 3 and 4 to record
from the connected mics and channels 1 and 2 to record comments from the internal mics.
Panel settings
Recording Setup
Recording comments simultaneously
Phantom power switch ON if using a condenser mic that requires phantom power; otherwise OFF
Input Select Int+Ana Set to Int+Ana to use the XLR input connector and the inter-
nal mics simultaneously.
Rec Freq. 44.1 kHz If using a computer to edit the waveforms after recording,
you may wish to use a higher sampling frequency.
Rec Bit 16 bit
Rec Mode STEREOx2 Set to STEREOx2 to record the externally connected mics in
stereo and to record the comments in stereo.
Pre Recording OFF, 1–29 sec Specify the pre-recording time as desired.
Project Name Date, Name
Specify a name that will help you manage the projects when
recording is finished.
Date... Using the Date setting makes it easy to tell the date and
time that the recording was made.
Name... Assigning a unique project name, so that the projects
have names such as SCENE001, SCENE002, and so forth,
makes it easy to see which projects belong together.
R-4_e_new.book 93 ページ ２００６年１１月２０日　月曜日　午後１時９分