Edirol R-4Pro Connecting the AC adapter and turning the power on/off

25

Getting ready to use the R-4 Pro

* Once the connections have been completed, turn on power to your various devices in the order specified. By turning

on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices.

* Reduce the volume before turning on power. Even when the volume is turned down, sound may be produced when

turning on the power. This is not a defect.

* If you connect the AC adapter when batteries are installed, the power will be supplied from the AC adapter.

fig.adapter.eps

Turning on the power

1 Connect the power conversion cable and AC adapter.

* Use only the included AC adapter.

2Plug the power conversion cable connector into the power connector on the R-4 Pro side panel (left).

3Plug the AC adapter into an AC power outlet.

4To turn the power on, press and hold the R-4 Pro [POWER] switch for about two seconds.

Wait until the Main screen appears.

942

* This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the

unit will operate normally.

Turning off the power

5From the Main screen, press and hold the R-4 Pro [POWER] switch for about five seconds to turn

the power off.

*923

* If there are batteries in the unit while an AC adaptor is being used, normal operation will continue should the line

voltage be interrupted (power blackout or power cord disconnection).

Connecting the AC adapter and turning the power on/off

R-4_e_new.book 25 ページ２００６年１１月２０日　月曜日　午後１時９分

Contents

Main Information 04450201 06-12-2N NORTH AMERICA EUROPE As of November 1, 2006 (EDIROL-2) Apparatus containing Lithium batteries ADVARSEL! VARNING CAUTION ADVARSEL Page Page Important Notes Power Supply: Use of Batteries Placement Maintenance Additional Precautions Handling Hard Disks Important Performance and Image Data Precautions Regarding Setup and Use Emergency Procedures Copyright Contents Checking the included items Introducing the R-4 Pro Internal mics [MIC-L, MIC-R] Internal speakers Power switch [POWER] The R-4 Pros controls and connectors Hold switch [HOLD] Phantom power switches [PHANTOM POWER] Limiter switch [LIMITER] Wave edit button [WAVE EDIT] Effect button [EFFECTS] System button [SYSTEM] Marker [MARKER] A-B Repeat button [A-B REPEAT] Cursor/Monitor Select buttons [CURSOR/MONITOR SELECT] Exit button [EXIT] Enter/Finder button [ENTER/FINDER] Scrub dial [SCRUB/VALUE] Shuttle dial [SHUTTLE] Front panel Power connector [DC IN] Digital output connector [DIGITAL OUT] Digital input connector [DIGITAL IN] USB Storage connector [STORAGE ONLY] Side panel (left) Headphone jack [PHONES] Grounding terminal XLR input connectors 14 Line output jacks [LINE OUT] Side panel (right) Battery compartment Bottom panel The Main screen Display While playing or stopped The Mixer screen The Main screen While recording Page Monaural projects What is a project? ABC-4.pjt MONOx4 MONOx2 Project Name Project Name BC-5.wav STEREOx2 ABC-6.pjt 4CH Getting ready to use the R-4 Pro R-4_e_new.book 24 921 Dynamic mic/Condenser mic For more about connections, refer to both Recording (p. 30) and Playing back (p. 37). Connecting the AC adapter and turning the power on/off Turning on the power 1 2 3 4 Turning off the power Installing batteries and turning on the power Getting ready to use the R-4 Pro Caution when using battery power on the R-4 Pro Getting ready to use the R-4 Pro Battery life Battery status Using external power sources Setting final voltage 2 3 4 Recording Connections Phantom power switch Limiter Recording from a connected mic sensitivity/Input level knobs Adjusting the input level 1. 2. 3. 4. 5. Caution regarding placement and handling while recording Phantom power switch Recording from the internal mics 1. 2. 3. 4. Connections 1. 2. 3. 4. Recording digital audio from a digital device Limiter Simultaneously recording sound from connected mics and a digital device Simultaneously recording sound from connected external mics and the internal mics Microp h one Playing back Connections before playback Connecting headphones Connecting amplified speakers Connecting a mixer or other analog device (analog connection: line output jacks) Page 2 3 Setup before playback Player Setup 2 press the [ENTER] button. Speaker 1 2 3 Playing back Normal playback 1 you want to assign a marker. 2 Markers 1 2 button stays lit, and that location becomes the end point (B) for repeat playback. Repeat playback (A-B REPEAT) Please note Finder functions Selecting a project (Select) 1 2 3 Deleting a project (Delete) 1 2 3 4 Renaming a project (Rename) 1 2 3 4 Copying a project (Copy) 1 2 3 4 Moving a project (Move) 1 2 3 4 Creating a new folder (Make Folder) 1 2 3 4 5 Editing 1 Menu screen is shown in the display. 2 [ENTER] button. 4 5 6 1 2 Divide 5 1 2 3 4 Combine 5 Editing 1 Menu screen is shown. 2 Merge Edit Timecode 1 2 3 4 Effects settings Effect types provided on the R-4 Pro 1 2 3 Applying effects 4 5 6 7 8 Effects Effects settings 4: Enhancer 5: Comp&DeEsser 6: MS-Mic System setup 2 3 4 5 6 Example operations Recording Setup settings Timecode settings Date & Time settings 2 3 4 2 Project Name settings Using the HDD Utility 2 3 4 5 Using the USB Storage Utility Executing Factory Reset (Restoring the factory default settings) 2 3 4 5 System Menu 1 Recording Setup Page Page 2 Player Setup 3 Speaker 4 LCD Setup 5 System Setup 6 Timecode 7 Date & Time 8 Project Name 9 HDD Utility 10 USB Storage Utility 11 Factory Reset Appendix Connection 1 ONLY] port. 2 Removal 1 2 1. 2. Formatting an external memory device 3. 4. 5. 3 Connecting to a computer Connecting the R-4 Pro to your computer Windows 1 2 Disconnecting the R-4 Pro from a computer 2 press the [ENTER] button. Connecting to a video device with a timecode port Setting timecode 3 4 5 6 7 8 Setting the start time Setting the internal timecode start time 2 3 4 Synchronize to an external timecode source Setting the REC-RUN timecode start time 2 3 4 5 Application guide Connecting an external mic for CD-quality stereo recording LCD Setup System Setup Recording birdsongs outdoors System Setup Recording audio while filming video Recording audio memos using just the R-4 Pro Simultaneously recording environmental sounds (ambience) Simultaneously recording at different input levels Recording comments simultaneously Messages Troubleshooting Computer-related problems Recording-related problems Troubleshooting Pan (stereo image) is not stored correctly Even though the recording levels are set, the sound is distorted when an effect is turned on The HDD Slow! message is shown Playback-related problems Problems with the R-4 Pro operation Main specifications Recorder Audio Input and Output Main specifications USB Interface Other Input/Output Part Effect Unit Part Control Others Block diagram Index Numerics A B C I J L M N R S T U W Page Page To resize thickness, move all items on the front cover This product complies with the requirements of European Directive 89/336/EEC. For the U.K. Apparatus containing Lithium batteries ADVARSEL! VARNING CAUTION ADVARSEL Information 04450201 06-12-2N NORTH AMERICA EUROPE As of November 1, 2006 (EDIROL-2)