41
Playing back
After performing the steps described in “Connections before playback” (p. 37) and “Setup before
playback” (p. 39), proceed as follows.
1Select the project that you want to play.
From the Main screen, press the [ENTER/FINDER] button. In the Finder screen that appears, use the
[CURSOR] up/down buttons and the [SCRUB] dial to select a project. For more about the Finder
screen, refer to “Finder functions” (p. 44).
Alternatively, you can use the [PREV] button or [NEXT] button on the front panel to select the project
you want to play. The projects are in alphabetical order.
2Press the [PLAY] button.
The selected project will play.
3Slowly raise the [MONITOR] level knob to the desired volume for listening.
* Projects with names beginning with “.” are ignored, and will not be shown.
* Projects whose filename extension is not .pjt or .wav will be ignored and will not be shown.
Playing backNormal playback
R-4_e_new.book 41 ページ ２００６年１１月２０日 月曜日 午後１時９分