Edirol R-4Pro - page 73

73

System setup

Rec Mode

MONOx1 One-channel recording to

one monaural file

This selects the structure of the project file that is

created during recording. A monaural WAV file

will be created for each channel. Choose these

settings if you are using a separate mic for the vo-

cal and performance or each speaker in a conver-

sation, so that a separate file is created for each

channel. These settings create monaural WAV

files. If Input Select is set to Analog, you can cre-

ate up to four monaural files. If Input Select is set

to IntMic or Digital, you can create up to two

monaural files.

* You cannot select MONO x3, MONO x4, or

STEREO x2 if Input Select is set to IntMic or

Digital.

* You cannot select MONO x3 or MONO x4 if

Rec Freq. is set to 88.2kHz, 96 kHz, or

192kHz.

MONOx2 Two-channel recording to

two monaural files

MONOx3 Three-channel recording to

three monaural files

MONOx4 Four-channel recording to

four monaural files

STEREOx1 Two-channel recording to

one stereo file

Two channels are recorded as L and R to create a

stereo WAV file.

If Input Select is set to Analog, one stereo WAV

file with channel 1 as L and channel 2 as R is cre-

ated. The inputs to channels 3 and 4 are ignored.

If Input Select is set to IntMic or Digital, one ste-

reo WAV file is created.

STEREOx2 Four-channel recording to

two stereo files

If Input Select is set to Analog, a stereo file with

channel 1 as L and channel 2 as R is created, and

another stereo file with channel 3 as L and chan-

nel 4 as R is also created.

*When Input Select is set to either IntMic or

Digital or when Rec Freq. is set to 192 kHz,

STEREO x 2 cannot be selected.

4CHx1 Four-channel recording to

one four-channel file

Channels 1–4 will be recorded as a single WAV

file. Be aware that not all computer software can

handle four-channel WAV files.

*When Input Select is set to either IntMic or

Digital or when Rec Freq. is set to 192 kHz,

4CH x 1 cannot be selected.

* Cannot be used if Input Select is set to IntMic or Digital.

Menu item Value Function

MONOx1 MONOx2 MONOx3 MONOx4 STEREOx1 STEREOx2 4CHx1

44.1kHz

48kHz

88.2kHz

96kHz

192kHz

R-4_e_new.book 73 ページ２００６年１１月２０日　月曜日　午後１時９分

Contents

Main Information 04450201 06-12-2N NORTH AMERICA EUROPE As of November 1, 2006 (EDIROL-2) Apparatus containing Lithium batteries ADVARSEL! VARNING CAUTION ADVARSEL Page Page Important Notes Power Supply: Use of Batteries Placement Maintenance Additional Precautions Handling Hard Disks Important Performance and Image Data Precautions Regarding Setup and Use Emergency Procedures Copyright Contents Checking the included items Introducing the R-4 Pro Internal mics [MIC-L, MIC-R] Internal speakers Power switch [POWER] The R-4 Pros controls and connectors Hold switch [HOLD] Phantom power switches [PHANTOM POWER] Limiter switch [LIMITER] Wave edit button [WAVE EDIT] Effect button [EFFECTS] System button [SYSTEM] Marker [MARKER] A-B Repeat button [A-B REPEAT] Cursor/Monitor Select buttons [CURSOR/MONITOR SELECT] Exit button [EXIT] Enter/Finder button [ENTER/FINDER] Scrub dial [SCRUB/VALUE] Shuttle dial [SHUTTLE] Front panel Power connector [DC IN] Digital output connector [DIGITAL OUT] Digital input connector [DIGITAL IN] USB Storage connector [STORAGE ONLY] Side panel (left) Headphone jack [PHONES] Grounding terminal XLR input connectors 14 Line output jacks [LINE OUT] Side panel (right) Battery compartment Bottom panel The Main screen Display While playing or stopped The Mixer screen The Main screen While recording Page Monaural projects What is a project? ABC-4.pjt MONOx4 MONOx2 Project Name Project Name BC-5.wav STEREOx2 ABC-6.pjt 4CH Getting ready to use the R-4 Pro R-4_e_new.book 24 921 Dynamic mic/Condenser mic For more about connections, refer to both Recording (p. 30) and Playing back (p. 37). Connecting the AC adapter and turning the power on/off Turning on the power 1 2 3 4 Turning off the power Installing batteries and turning on the power Getting ready to use the R-4 Pro Caution when using battery power on the R-4 Pro Getting ready to use the R-4 Pro Battery life Battery status Using external power sources Setting final voltage 2 3 4 Recording Connections Phantom power switch Limiter Recording from a connected mic sensitivity/Input level knobs Adjusting the input level 1. 2. 3. 4. 5. Caution regarding placement and handling while recording Phantom power switch Recording from the internal mics 1. 2. 3. 4. Connections 1. 2. 3. 4. Recording digital audio from a digital device Limiter Simultaneously recording sound from connected mics and a digital device Simultaneously recording sound from connected external mics and the internal mics Microp h one Playing back Connections before playback Connecting headphones Connecting amplified speakers Connecting a mixer or other analog device (analog connection: line output jacks) Page 2 3 Setup before playback Player Setup 2 press the [ENTER] button. Speaker 1 2 3 Playing back Normal playback 1 you want to assign a marker. 2 Markers 1 2 button stays lit, and that location becomes the end point (B) for repeat playback. Repeat playback (A-B REPEAT) Please note Finder functions Selecting a project (Select) 1 2 3 Deleting a project (Delete) 1 2 3 4 Renaming a project (Rename) 1 2 3 4 Copying a project (Copy) 1 2 3 4 Moving a project (Move) 1 2 3 4 Creating a new folder (Make Folder) 1 2 3 4 5 Editing 1 Menu screen is shown in the display. 2 [ENTER] button. 4 5 6 1 2 Divide 5 1 2 3 4 Combine 5 Editing 1 Menu screen is shown. 2 Merge Edit Timecode 1 2 3 4 Effects settings Effect types provided on the R-4 Pro 1 2 3 Applying effects 4 5 6 7 8 Effects Effects settings 4: Enhancer 5: Comp&DeEsser 6: MS-Mic System setup 2 3 4 5 6 Example operations Recording Setup settings Timecode settings Date & Time settings 2 3 4 2 Project Name settings Using the HDD Utility 2 3 4 5 Using the USB Storage Utility Executing Factory Reset (Restoring the factory default settings) 2 3 4 5 System Menu 1 Recording Setup Page Page 2 Player Setup 3 Speaker 4 LCD Setup 5 System Setup 6 Timecode 7 Date & Time 8 Project Name 9 HDD Utility 10 USB Storage Utility 11 Factory Reset Appendix Connection 1 ONLY] port. 2 Removal 1 2 1. 2. Formatting an external memory device 3. 4. 5. 3 Connecting to a computer Connecting the R-4 Pro to your computer Windows 1 2 Disconnecting the R-4 Pro from a computer 2 press the [ENTER] button. Connecting to a video device with a timecode port Setting timecode 3 4 5 6 7 8 Setting the start time Setting the internal timecode start time 2 3 4 Synchronize to an external timecode source Setting the REC-RUN timecode start time 2 3 4 5 Application guide Connecting an external mic for CD-quality stereo recording LCD Setup System Setup Recording birdsongs outdoors System Setup Recording audio while filming video Recording audio memos using just the R-4 Pro Simultaneously recording environmental sounds (ambience) Simultaneously recording at different input levels Recording comments simultaneously Messages Troubleshooting Computer-related problems Recording-related problems Troubleshooting Pan (stereo image) is not stored correctly Even though the recording levels are set, the sound is distorted when an effect is turned on The HDD Slow! message is shown Playback-related problems Problems with the R-4 Pro operation Main specifications Recorder Audio Input and Output Main specifications USB Interface Other Input/Output Part Effect Unit Part Control Others Block diagram Index Numerics A B C I J L M N R S T U W Page Page To resize thickness, move all items on the front cover This product complies with the requirements of European Directive 89/336/EEC. For the U.K. Apparatus containing Lithium batteries ADVARSEL! VARNING CAUTION ADVARSEL Information 04450201 06-12-2N NORTH AMERICA EUROPE As of November 1, 2006 (EDIROL-2)