Selecting the System and Group | EFJohnson High Tier, LTR 98xx

GENERAL OPERATION

Selecting the System and Group

The front panel Select switch is used to change the system and group. Pressing this switch toggles between the system and group select modes, and then rotating it increases or decreases the system or group.

In the Numeric display mode (see preceding description), the system select mode is indicated when the arrow points to “Sxx”, and the group select mode is indicated when it points to “Gxx” (see following diagram).

System Select		Group Select
Mode		Mode

Select Mode Indication With Numeric Display

In the Alpha Tag display mode, the system select mode is indicated by an underline in the left-most character position of the system alpha tag. Likewise, the group select mode is indicated by an underline in the left-most position of the group alpha tag (see following diagram).

System Select		Group Select
Mode		Mode

Select Mode Indication With Alpha Tag Display

The transceiver can be programmed so that after a change is made, the current select mode remains enabled or a default mode is selected after a delay of up to 15 seconds. This programming also controls the mode that is selected when power is turned on.

17

Image 17

EFJohnson High Tier, LTR 98xx manual Selecting the System and Group, Select Mode Indication With Numeric Display

Contents

High Tier Operating Manual Page Page Safety Information Limits For General Population/Uncontrolled Exposure FCC Exposure Limits Frequency Whip Model No Base Model No Table of Contents Table of Contents Quick Reference Guide General Features Features Front Panel Controls Controls and Display Microphone Push-To-Talk PTT Switch Not Shown Push-button on Rear Panel Jacks and Connectors Display Description General Operation Power-Up SequenceDetermining Volume Level Alpha Tag Display Mode Numeric Display ModeBacklight Operation System/Group Display Information Selecting the System and Group Select Mode Indication With Numeric DisplaySelect Mode Indication With Alpha Tag Display Setting Squelch Control Introduction Standard CallsPlacing a Standard Call LTR Operation Receiving a Standard Call Conventional Operation Placing Telephone Calls Telephone Calls Receiving a Telephone Call Bank Select General FeaturesLandside-Originate Calls Encryption Call IndicatorEmergency Switch Function FCN Switch Encryption Indicator Horn Alert Home System/Group Select Option Select Power Turn-Off Delay Proceed Clear-To-Talk Tone Receive-Only Groups Stealth ModeTime-Out Timer Option Switches Option Switches and Menu ModeTone Select Transmitter Thermal Foldback Switch Menu Mode and Option Switch Functions Using Menu Mode Menu Mode Introduction System and Group Scan System and Group Scan Scan List Programming Transmitting In The Scan Mode Scan Delay and Continue Timers System and Group Scan General LTR and Conventional Modes Monitoring Conventional Channels Before Transmitting Calls on Priority and Block ID Codes LTR FeaturesStandard and Telephone Calls Transmit Inhibit System Search Busy Queuing Transpond Transmit Disable On Busy Conventional FeaturesMonitor Mode Talk-Around Priority Group Sampling Call Guard Squelch Supervisory Tones Miscellaneous Miscellaneous LTR Telephone Call Tones Display Messages Miscellaneous Bright DIM OFF Menu Mode Messages Speaking Into Microphone System Operator Programming Licensing Preventing Battery DischargeOperation At Extended Range Transceiver Service