Home System/Group Select, Horn Alert | EFJohnson LTR 98xx instruction

GENERAL FEATURES

Squelch Adjust - Pressing FCN and then rotating the Select switch with a conventional system selected sets the squelch level as described on page 18.

Home System/Group Select

To select the preprogrammed Home system/group, simply press the FCN switch and then the Select switch. The Home system/group is then displayed and it becomes the selected system/group. If no home group has been programmed, the last selected group of the home system is selected. If you do not have a FCN switch, or if no Home system is programmed, this feature is not available.

Horn Alert

If this feature has been installed by your system operator, it activates an external alert such as the vehicle horn or lights when a call is received on a group programmed for horn alert. When the horn alert is enabled,

is displayed as shown in the following illustration.

Horn Alert

Enabled

When enabled, the horn alert pulses on and off for 1-8 cycles and then goes back to the disabled state. To change the currently selected horn alert mode, the HORN option switch or HRN ALRT menu parameter can be used if available (see page 30).

The horn alert is programmed to operate in the manual or automatic mode (see descriptions which follow). If the ignition switch does not control transceiver power, only the front panel power switch affects oper- ation when applicable. Refer to “Power Turn-Off Delay” on page 27 for more information.

26

Image 26

EFJohnson LTR 98xx, High Tier manual Home System/Group Select, Horn Alert

Contents

High Tier Operating Manual Page Page Safety Information FCC Exposure Limits Limits For General Population/Uncontrolled Exposure Frequency Whip Model No Base Model No Table of Contents Table of Contents Quick Reference Guide Features General Features Controls and Display Front Panel Controls Microphone Push-To-Talk PTT Switch Not Shown Push-button on Rear Panel Jacks and Connectors Display Description General Operation Power-Up SequenceDetermining Volume Level Backlight Operation Numeric Display ModeAlpha Tag Display Mode System/Group Display Information Selecting the System and Group Select Mode Indication With Numeric DisplaySelect Mode Indication With Alpha Tag Display Setting Squelch Control Placing a Standard Call Standard CallsIntroduction LTR Operation Conventional Operation Receiving a Standard Call Telephone Calls Placing Telephone Calls Receiving a Telephone Call Bank Select General FeaturesLandside-Originate Calls Encryption Call IndicatorEmergency Switch Encryption Indicator Function FCN Switch Home System/Group Select Horn Alert Power Turn-Off Delay Option Select Proceed Clear-To-Talk Tone Receive-Only Groups Stealth ModeTime-Out Timer Tone Select Option Switches and Menu ModeOption Switches Transmitter Thermal Foldback Menu Mode and Option Switch Functions Switch Menu Mode Introduction Using Menu Mode System and Group Scan System and Group Scan Scan List Programming Scan Delay and Continue Timers Transmitting In The Scan Mode System and Group Scan LTR and Conventional Modes General Monitoring Conventional Channels Before Transmitting Calls on Priority and Block ID Codes LTR FeaturesStandard and Telephone Calls Transmit Inhibit Busy Queuing System Search Transpond Transmit Disable On Busy Conventional FeaturesMonitor Mode Talk-Around Call Guard Squelch Priority Group Sampling Miscellaneous Supervisory Tones Miscellaneous LTR Telephone Call Tones Display Messages Miscellaneous Menu Mode Messages Bright DIM OFF System Operator Programming Speaking Into Microphone Licensing Preventing Battery DischargeOperation At Extended Range Transceiver Service