Display Description | EFJohnson LTR 98xx, High Tier guide

CONTROLS AND DISPLAY

System Scan

Phone

Scan

Call Priority

Group Scan

List

ID

Selected

Groups

List

Encryption	Horn	16-Character Option	Monitor
	Alert	Message Area

Display Description

16-Character Message Area - Indicates the selected system and group (see page 16) and also error conditions and status information.

- Indicates that the displayed system is in the scan list and scanned normally (see page 35).

- Indicates that the displayed group is in the scan list and scanned normally (see page 35).

- Indicates that the selected group is programmed for telephone calls (see “TELEPHONE CALLS” on page 21).

- Indicates that optional encryption is enabled (see page 24).

- Indicates that the horn alert is enabled (see page 26).

- Indicates that scanning is enabled (see page 33).

- Indicates that an option controlled by the AUX switch is enabled (see page 24).

14

Image 14

EFJohnson LTR 98xx, High Tier manual Display Description

Contents

High Tier Operating Manual Page Page Safety Information FCC Exposure Limits Limits For General Population/Uncontrolled Exposure Frequency Whip Model No Base Model No Table of Contents Table of Contents Quick Reference Guide Features General Features Controls and Display Front Panel Controls Microphone Push-To-Talk PTT Switch Not Shown Push-button on Rear Panel Jacks and Connectors Display Description General Operation Power-Up SequenceDetermining Volume Level Backlight Operation Numeric Display ModeAlpha Tag Display Mode System/Group Display Information Selecting the System and Group Select Mode Indication With Numeric DisplaySelect Mode Indication With Alpha Tag Display Setting Squelch Control Placing a Standard Call Standard CallsIntroduction LTR Operation Conventional Operation Receiving a Standard Call Telephone Calls Placing Telephone Calls Receiving a Telephone Call Bank Select General FeaturesLandside-Originate Calls Encryption Call IndicatorEmergency Switch Encryption Indicator Function FCN Switch Home System/Group Select Horn Alert Power Turn-Off Delay Option Select Proceed Clear-To-Talk Tone Receive-Only Groups Stealth ModeTime-Out Timer Tone Select Option Switches and Menu ModeOption Switches Transmitter Thermal Foldback Menu Mode and Option Switch Functions Switch Menu Mode Introduction Using Menu Mode System and Group Scan System and Group Scan Scan List Programming Scan Delay and Continue Timers Transmitting In The Scan Mode System and Group Scan LTR and Conventional Modes General Monitoring Conventional Channels Before Transmitting Calls on Priority and Block ID Codes LTR FeaturesStandard and Telephone Calls Transmit Inhibit Busy Queuing System Search Transpond Transmit Disable On Busy Conventional FeaturesMonitor Mode Talk-Around Call Guard Squelch Priority Group Sampling Miscellaneous Supervisory Tones Miscellaneous LTR Telephone Call Tones Display Messages Miscellaneous Menu Mode Messages Bright DIM OFF System Operator Programming Speaking Into Microphone Licensing Preventing Battery DischargeOperation At Extended Range Transceiver Service