Placing Telephone Calls | EFJohnson High Tier, LTR 98xx instruction

TELEPHONE CALLS

TELEPHONE CALLS

Placing Telephone Calls

NOTE: Telephone calls can be placed and received only if that service is available to you and your transceiver has been programmed appropri- ately. A microphone equipped with a telephone keypad is required to dial the telephone number.

The telephone calling feature allows you to place and receive tele- phone calls using your transceiver. The following information describes how these calls are made with LTR operation. If you can make telephone calls with conventional operation, the procedure may be somewhat different and your system operator will then provide additional informa- tion. Proceed as follows:

1.Turn transceiver power on and set the volume as described starting on page 15.

2.Select the system and group programmed for telephone calls. When a

telephone group is selected, is displayed.

3.To obtain the dial tone, briefly press the PTT switch. If the proceed tone is used, press the PTT switch until a beep sounds. If a dial tone is then heard, proceed to step 4.

Busy and Out-Of-Range Conditions

Busy and out-of-range conditions are indicated the same as with LTR standard calls described on page 19. The following additional features may be available with telephone calls:

Busy - If Busy Queuing is programmed (see page 42), the call is auto- matically placed in a queue when the PTT switch is released. The Busy Queuing mode is indicated by “IN QUEUE” in the display.

21

Image 21

EFJohnson High Tier, LTR 98xx manual Placing Telephone Calls

Contents

High Tier Operating Manual Page Page Safety Information Limits For General Population/Uncontrolled Exposure FCC Exposure Limits Frequency Whip Model No Base Model No Table of Contents Table of Contents Quick Reference Guide General Features Features Front Panel Controls Controls and Display Microphone Push-To-Talk PTT Switch Not Shown Push-button on Rear Panel Jacks and Connectors Display Description Power-Up Sequence Determining Volume LevelGeneral Operation Alpha Tag Display Mode Numeric Display ModeBacklight Operation System/Group Display Information Select Mode Indication With Numeric Display Select Mode Indication With Alpha Tag DisplaySelecting the System and Group Setting Squelch Control Introduction Standard CallsPlacing a Standard Call LTR Operation Receiving a Standard Call Conventional Operation Placing Telephone Calls Telephone Calls Receiving a Telephone Call General Features Landside-Originate CallsBank Select Call Indicator Emergency SwitchEncryption Function FCN Switch Encryption Indicator Horn Alert Home System/Group Select Option Select Power Turn-Off Delay Proceed Clear-To-Talk Tone Stealth Mode Time-Out TimerReceive-Only Groups Option Switches Option Switches and Menu ModeTone Select Transmitter Thermal Foldback Switch Menu Mode and Option Switch Functions Using Menu Mode Menu Mode Introduction System and Group Scan System and Group Scan Scan List Programming Transmitting In The Scan Mode Scan Delay and Continue Timers System and Group Scan General LTR and Conventional Modes Monitoring Conventional Channels Before Transmitting LTR Features Standard and Telephone CallsCalls on Priority and Block ID Codes Transmit Inhibit System Search Busy Queuing Transpond Conventional Features Monitor ModeTransmit Disable On Busy Talk-Around Priority Group Sampling Call Guard Squelch Supervisory Tones Miscellaneous Miscellaneous LTR Telephone Call Tones Display Messages Miscellaneous Bright DIM OFF Menu Mode Messages Speaking Into Microphone System Operator Programming Preventing Battery Discharge Operation At Extended RangeLicensing Transceiver Service