EFJohnson LTR 98xx, High Tier manual System and Group Scan

SYSTEM AND GROUP SCAN

System Scan List Group Scan List

System or Group	System or Group
Scanning Selected	Scanning Occurring

The type of scanning selected is determined by the menu mode SCN TYPE parameter (see page 32). If that parameter is not selectable, the type of scanning is fixed by programming. The available scan types are as follows.

SYS-GRP - Both system and group GRP ONLY - Group scanning only

OFF - Both types disabled (SCAN switch non-functional)

If the SCAN option switch is not programmed, the selected mode is always enabled. If the switch is enabled but the menu SCN TYPE param- eter is not selectable, the scan type is fixed by programming.

Group scanning can be selectively disabled on systems by program- ming. It then does not occur on those systems even if enabled as just described. The selected system and group can be changed while scanning using the Select switch in the normal manner. Scanning resumes shortly after the change is made.

When a call is received in the scan mode, the display changes to the system and group of the call. Programming determines if this change is temporary (until scanning resumes) or permanent, and if a response occurs on the system/group of the call or the selected system/group. Refer to “Transmitting In The Scan Mode” on page 36 for more information.

34