SECTION 4 CRT-BASED ELECTRONICS ASSEMBLY PART I
4.1 INTRODUCTION
Since you have purchased the E.F. JOHNSON console system as electronics only and intend to use another manufacturer s cabinetry, these install instruc- tions will have to be interpreted broadly.
4.2INSTALL THE PC/UPS SLIDE TRAY Table
PC CPU Part No. | 200TC4862501 |
|
|
Possible option numbers for the PC UPS | |
|
|
Part Number | Country |
|
|
North America | |
Great Britain, S. Africa | |
Europe | |
India | |
New Zealand/Australia | |
|
|
Table 4-2 SLIDE TRAY HARDWARE
Qty | Part No. | Description |
8 | 280621122400 | Tinnerman Clips |
8280124102412
2 Slide Assembly (see Figure
Qty. | Part No. | Description |
2 | 144233259 | Mounting Bracket |
2146563216 16" Slide Assembly
1 Slide Assembly (see Figure
1 | 144233258 | Tray |
1 | 124163270 | Swivel Mount |
1144233386 PC Tray Bracket
3.Attach the slide mount assemblies to the bottom of the console using eight (8) Tinnerman clips (280621122400) and eight (8)
4.Slide the Slide Tray Assembly onto the slide mounts. Refer to Figure
Figure 4-1 PC AND UPS SLIDE TRAY AS-
SEMBLY
4.3CRT INTERFACE PROCESSOR (CIP) Table
Qty | Part No. | Description |
4 | 280621122400 | Tinnerman Clips |
4 | 280124102412 | |
|
|
|
4.3.1INSTALL THE CIP POWER SUPPLY
1.Install the CIP Power Supply is installed in the upper turret of the console directly behind the CIP tray. Use the four (4) Tinnerman clips and four (4)
| February 1996 |
Part No. |