Eiki EIP-1000T owner manual Quick Start, Setup and Projection, Standby-On

Quick Start

This section shows the basic operation (projector connecting with the video equipment). For details, see the page described below for each step.

Setup and Projection

In this section, connection of the projector and the video equipment is explained using one ex- ample.

3

STANDBY-ON

8 button

5	INPUT buttons
7	Adjustment buttons
	(P/R/O/Q)

7KEYSTONE button

6Focus ring

6Zoom ring

6HEIGHT ADJUST lever

8STANDBY button

3ON button

7KEYSTONE button

7Adjustment buttons (P/R/O/Q)

5INPUT 3 button

1. Place the projector facing a wall or a screen _P. 18

2.Connect the projector to the video equipment and plug the power cord into the AC socket of the projector

To AUDIO (INPUT 3, 4) terminal

To INPUT 3 terminal

AC socket

_PP. 22–28

3. Remove the lens cap and turn the projector on

On the projector On the remote control

_P. 28

16