Eiki EIP-1000T owner manual Connecting to Video Equipment, To audio output, Sub adaptor

Connecting to Video Equipment

Before connecting, ensure that the power cord of the projector is unplugged from the AC outlet and turn off the devices to be connected. After making all connections, turn on the projector first and then the other devices.

The projector is equipped with input terminals that support component, S-video, and video signals. See the illustration below to connect with the audio-visual equipment.

The image quality is highest in the order of the component signal, the S-video signal and the video signal. If your audio-visual equipment has a component output terminal, use the COMPUTER/ COMPONENT terminal (INPUT1 or INPUT 2) on the projector for video connection.

When connecting to equipment with component output terminal (INPUT1 or INPUT2)

		Supplied	3 RCA to 15-pin
To audio output		accessory	D-sub adaptor
terminal	To component output
	(Y, CB/PB, CR/PR) terminal
	DVD, etc.	To INPUT1 terminal	To AUDIO (INPUT1, 2)
			terminal

Component cable (commercially available)

ø3.5 mm minijack to RCA audio cable* (commercially available)

*Use the cable when you want to enjoy the sound from the projector’s speaker.

3 RCA to 15- pin D-sub adaptor

23