Eiki EIP-1000T Connecting to a Computer, To audio output terminal To RGB output terminal Computer

Connecting to a Computer

When connecting a computer, ensure that it is the last device to be turned on after all the connections are made.

Ensure that you have read the owner’s manuals of the devices to be connected before making connections.

To audio output terminal

To RGB output terminal

Computer

accessory

To INPUT1 terminal	To AUDIO
	(INPUT1, 2)
	terminal

RGB Cable

* ø3.5 mm stereo or(commercially available) mono audio cable

(commercially

available)

*When using the ø3.5 mm mono audio cable, the volume level will be half of when using the ø3.5 mm stereo audio cable.

Note

•See page 54 “Computer Compatibility Chart” for a list of computer signals compatible with the projec- tor. Use with computer signals other than those listed may cause some of the functions to not work.

•A Macintosh adaptor may be required for use with some Macintosh computers. Contact your near- est Macintosh Dealer.

•Depending on the computer you are using, an image may not be projected unless the computer’s external output port is switched on. Refer to the specific instructions in the owner’s manual of your computer to enable your computer’s external output port.

25