Zoom ring
• When using the remote control, press the 4 button to switch the INPUT mode.
On the remote control
S INPUT 3
• When pressing the INPUT button on the projector, input mode switches in the following order: INPUT1 INPUT2 INPUT3 INPUT4
On-screen display
On the projector
Select the “INPUT 3” using the INPUT button on the projector or D INPUT 3 on the remote control.
4. Turn the video equipment on and start playback
5. Select the INPUT mode

CINPUT 1/CINPUT 2/DINPUT 3/EINPUT

_P. 30

6. Adjust the focus, image size, and projector angle

1.Adjust the focus by turning the focus ring.

2.Adjust the projection image size by turning the zoom ring.

3.Adjust the projector angle using the HEIGHT ADJUST lever.

Focus ring

_PP. 30, 31

7. Correct trapezoidal distortion

Correcting trapezoidal distortion using the Keystone Correction.

On the projector

Shrinks

Shrinks

upper side.

lower side.

On the remote control

_P. 33

8. Turn the Power off

Press the STANDBY-ON button on the projector or the STANDBY button on the remote control, and then press the button again while the confirmation message is displayed, to put the projector into standby mode.

On the

On the remote

On-screen Display

 

 

 

projector

control

 

 

• Unplug the power cord from the AC outlet after the cooling fan stops.

_P. 29

17

Page 20
Image 20
Eiki EIP-1000T owner manual Upper side, On the remote control