Eiki LC-XBM31 owner manual Manual PC Adjustment

Computer Input

Manual PC Adjustment

Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has five independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer.

1	Press the MENU button to display the On-Screen	PC adjust Menu
	Menu. Use the Point ▲▼ buttons to select PC
	adjust and then press the Point ► or the SELECT
	button.
2	Use the Point ▲▼ buttons to select the desired
	item and then press the SELECT button to display

the adjustment dialog box. Use the Point ◄► buttons to adjust the setting value.

Fine sync

Use the Point ◄► buttons to adjust the value, eliminating a flicker from the image displayed (from 0 to 31).

Total dots

Use the Point ◄► buttons to adjust the number of total dots in one horizontal period to match your PC image.

Horizontal

Use the Point ◄► buttons to adjust the horizontal picture position.

Vertical

Use the Point ◄► buttons to adjust the vertical picture position.

Current mode

Press the SELECT button to show H-sync freq. and V- sync freq. of the connected computer.

Clamp

Use the Point ◄► buttons to adjust the clamp level.

When the image has dark bars, try this adjustment.

Display area H

Use the Point ◄► buttons to adjust the horizontal area displayed by this projector.

Display area V

Use the Point ◄► buttons to adjust the vertical area displayed by this projector.

30