Information
Input Source Information Display
The Information Menu is used for checking the status of the image signal being projected and the operation of the projector.
Direct Operation
Press the INFO. button on the remote control to display | Remote Control |
the Information Menu. |
|
Menu Operation
Press the Point ▲▼ buttons to select the Information.
The Information Menu is displayed.
See below for displayed information. | INFO. button |
Input |
|
The selected input source is displayed. |
|
| |
The horizontal frequency of the input signal is | Information Menu |
displayed in KHz, or - - - - KHz when no signal. |
The vertical frequency of the input signal is displayed in Hz, or - - - - Hz when no signal. Numbers of Hz doubles when during Interlace.
Screen
The selected screen size is displayed.
Language
The selected language is displayed.
Lamp status
The selected lamp mode is displayed.
Lamp counter
The cumulative lamp operating time is displayed.
Power management
Off, Ready or Shut down, and Timer are displayed.
Key lock
The selected Key lock icon is displayed.
PIN code lock
Off or On 1 or On 2 is displayed.
Remote control
The selected remote code is displayed.
SERIAL NO.
The serial number of the projector is displayed. The serial number is used to service the projector.
57
