Video Input

Video System Selection

1

Press the MENU button to display the On-Screen

 

Menu. Use the Point ▲▼ buttons to select Input

 

and then press the Point ► or the SELECT button.

2

Select Video, Computer 1(S-video) or Computer

 

1(Component) input source. (See pages 36-37)

3

Use the Point ▲▼ buttons to select System and

then press the Point ► or the SELECT button. Use

the Point ▲▼ buttons to select the desired system and then press the SELECT button.

Video or S-video

Auto

The projector automatically detects an incoming video system, and adjusts itself to optimize its performance. When Video System is PAL-Mor PAL-N, select the system manually.

PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N

If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4.43, PAL-Mand PAL-N.

Component

Auto

The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance.

COMPONENT VIDEO SIGNAL FORMAT

If the projector cannot reproduce proper video image, select a specific component video signal format from among 480i, 575i, 480p, 575p, 720p, 1035i and 1080i.

AV System Menu (Video or S-video)

AV System Menu (Component)

Note:

The AV System Menu cannot be selected when selecting RGB (Scart).

38

Page 38
Image 38
Eiki LC-XBM31 Video System Selection, Video or S-video Auto, Component Auto, Select Video, Computer 1S-video or Computer