Eiki LC-XBM31 owner manual Computer Input, Computer System Selection, Auto, Mode, PC System Menu

Computer Input

Computer System Selection

This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Signal formats provided in this projector are shown on page 70.)

One of the following messages may appear when:

Auto

-----

When the projector cannot recognize

the connected signal conforming to thePC System Menu provided PC systems, Auto is displayed

on the System Menu box and the Auto PC Adjustment function works to display proper images. If the image is not projected properly, a manual adjustment is required (pp. 30-31).

There is no signal input from the computer. Check the connection between your computer and the projector. (See “Troubleshooting” on p. 63.)

Mode 1

SVGA 1

The preset system is manually adjusted in the PC adjust Menu. The adjusted data can be stored in Mode 1–10(pp. 30-31).

PC Systems provided in this projector is chosen. The projector chooses a proper system provided in the projector and displays it.

Selected system in the PC System Menu is displayed.

*Mode 1 and SVGA 1 are examples.

Selecting Computer System Manually

PC system can also be selected manually.

1	Press the MENU button to display the On-Screen
	Menu. Use the Point ▲▼ buttons to select Input
	and then press the Point ► or the SELECT button.
2	Use the Point ▲▼ buttons to select System and
	then press the Point ► or the SELECT button.
3	Use the Point ▲▼ buttons to select the desired
	system and then press the SELECT button.

	Customized Mode
	(1–10)set in the PC
	adjust Menu (pp.
PC System Menu	30-31).

Systems in this dialog box can be selected.

28