Flow of ON-SCREEN Menu | Eiki LC-XC1 specs

LC-XC1

OPERATING ON-SCREEN MENU

HOW TO OPERATE ON-SCREEN MENU

You can control and adjust this projector through the ON- SCREEN MENU. Refer to the following pages to operate each adjustment in the ON-SCREEN MENU.

Move the pointer (see the NOTE below) by pressing POINT button(s) on the TOP CONTROL or the REMOTE CONTROL.

Select the item by pressing SELECT button.

NOTE: Pointer is the icon on the ON-SCREEN MENU to select the item. See the figures on the section ‘FLOW OF ON-SCREEN MENU' below.

FLOW OF ON-SCREEN MENU

Display ON-SCREEN MENU

1

2

Press MENU button to display the ON-SCREEN

MENU

(MENU BAR). The red frame is the POINTER.

Move the POINTER (red frame) to the ITEM ICON that

you want to select by pressing POINT RIGHT I LEFT buttons.

3 Select the ITEM by pressing SELECT button. The dialog box of the ITEM appears.

4 Move the POINTER downward by pressing POINT DOWN button. (The shape of the POINTER becomes an arrow.)

5 Move the POINTER to the ITEM that you want to adjust and adjust the ITEM by pressing SELECT button. Refer to the following pages for details of respective adjustments.

18

Image 18

Eiki LC-XC1 owner manual Flow of ON-SCREEN Menu

Contents

Model LC-XC1 To the Owner Safety Instructions Compliances Table of Contents IBM-compatible and Macintosh computers up to Progressive scan signals and provide fine picture qualityProjector and computer with this Remote Control Unit only Color Systems LC-XC1 Projector side AC Outlet side Positioning the Projector Room Light Adjustable Feet Latches on both sides of the projector Input Terminals This projector uses a micro processor to control Reset function excessivelyWhen using the Wired / Wireless Refer to LC-XC1 LC-XC1 Indicators Laser Pointer Function Replace Compartment lid Flow of ON-SCREEN Menu Menu BAR Turning OFF the Projector Turn the Main on I OFF Switch to ON. The Lamp indicatorTurning on the Projector Appliance cannot be turned on Lens Shift Adjustment Zoom AdjustmentFocus Adjustment Press the Zoom !/∀buttons on the Top Control or on Picture Freeze Function Keystone AdjustmentTimer function ∀button or the Point UP/DOWN buttons. Press Direct Operation Menu Operation Automatic MULTI-SCAN System To set the Computer system manually, select the mode onNo signal System Menu will appear Compatible Computer Specifications Point UP/DOWN button and the Select button. To Reset Mode free Stored Quit Stores the adjusted data in the memory Recalls the data previously adjustedReset Closes Image Menu Normal Function Setting data in the memory LEFT/RIGHT buttons, and then press the Select buttonCloses Menu P24 ∀, SELECT, Right CLICK, or Point button. To adjustDisplayed. Correct the Keystone distortion by pressing This projector cannot display any Direct Operation Menu OperationVideo I S-Video / Y, PbICb, Pr/Cr Video Signal from Video Jack or S-VIDEO Jack Video Signal from Y, Pb/Cb, Pr/Cr Jacks Noise reduction CustomColor Progressive Regular Wide Power off? message DisplayBlue back To return to the normal code Mode 1, operate both projector Remote controlSet the Remote control in Setting Menu to Mode Returns to the normal code Mode Connection InstallationOperating Wireless Mouse Not work properly Temperature Warning Indicator AIR Filter Care and CleaningParticles, it will reduce the Cooling Fans’ Lamp Replacement Monitor Timer Cover Cleaning ThE Projection Lens Seen during Picture isTop/Bottom Reversed Some displays are not No image Cabinet Panel Resolution Dimensions W x H x DNet Weight Signal Scanning Frequency Terminal DVI 24-pin MAC AdapterTerminal HDB1 5-PIN Terminal Mini DIN 8-PIN Eiki Deutschland Gmbh