LC-XC1
8
This projector uses nominal input voltages of 100-120 V or
200-240 V AC. The projector automatically selects the
correct input voltage. It is designed to work with single-
phase power systems having a grounded neutral conductor.
To reduce the risk of electrical shock, do not plug into any
other type of power system.
Consult your authorized dealer or service station if you are
not sure of the type of power supply being in use.
Connect the projector with the peripheral equipment before
turning the projector on. (Refer to pages 11 14 ror
connection.)
CONNECTING THE AC POWER CORD

CAUTION

For safety, unplug the AC Power Cord when the
appliance is not used.
When this projector is connected to the outlet
with the AC Power Cord, the appliance is in
Stand-by Mode and consumes a little electric
p
ower.

NOTE ON THE POWER CORD

The AC Power Cord must meet the requirement of the country where you use the projector
Confirm the AC plug type with the chart below. The proper AC power cord must be used.
If the supplied AC Power Cord does not match the AC outlet, contact your sales dealer.
Projector side AC Outlet side