LC-XC1
31
This projector has a picture screen resize function, which enables you to display the desirable image size.
1
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select SCREEN ~ and press the SELECT button. Another dialog box SCREEN MENU will appear.
2
Press the POINT DOWN button and a red-arrow icon
will appear. Move the arrow to the function that you want
to select and then press SELECT button.
To make the image into its original size, select
True in the dialog box. When the original image size is larger
than the screen size (1024 x 768), the image can be panned by
pressing the POINT UP/DOWN/LEFT/RIGHT buttons.
When the image is distorted vertically, select
Keystone in the dialog box. The ON-SCREEN MENU and
SCREEN MENU disappears and the message “Keystone” is
displayed. Correct the Keystone distortion by pressing the
KEYSTONE !
!!
!/"
""
"button or the POINT UP/DOWN button(s).
Refer to KEYSTONE ADJUSTMENT on page 20.
To adjust the image size or pan the image, select
Digital zoom in the dialog box. The ON-SCREEN MENU and
SCREEN MENU disappears, and the magnifying glass icon and
the message “D. Zoom” is displayed.
This projector also enters Digital Zoom mode by pressing the
D.ZOOM !
!!
!/"
""
"button on the Remote Control Unit.
Refer to the following for operation.
Expand function
To expand the image size, press the D.ZOOM !
!!
! button or
the SELECT button. The image is magnified by degrees.
NOTE
• The True and the Digital Zoom cannot be
operated when ‘RGB,” “HDTV1O35i” or
“HDTV1O8Oi” is selected on SYSTEM
MENU (P24 and 25).
• This projector cannot display any
resolution higher than 1280 X 1024. If your
computer’s screen resolution is higher than
1280 X 1024, reset the resolution to the
lower before connecting the projector.
• T he image data in other than XGA (1024 x
768) is modified to fit th e screen size in the
initial mode.
• The normal “Panning Op eration” may not
function properly if the computer system
prepared with the “PC Adjust” is used.
Panning function
To pan the image, press the POINT UP/DOWN/LEFT/RIGHT
buttons. Panning function can work only when the image is larger
than the screen size.
To cancel Digital Zoom mode, press any button except D.ZOOM
!
!!
!/"
""
", SELECT, RIGHT CLICK, or POINT button. To adjust the
image to 1024 x 768, press NORMAL button.
Compress function
To compress the image size, press the D.ZOOM "
""
" button or
the RIGHT CLICK button. The size of image is reduced by
degrees