Eiki LC-XC1 owner manual Cabinet

			LC-XC1
Problem:	Try these Solution
Remote Control Unit does not	Check the batteries.
work	Check the ALL-OFF switch on the Remote Control Unit is set to “ON.”.
	Make sure nothing is between the Remote Receiver and the Remote
		Control Unit.
	Make sure you are not too far from the projector when using the
		Remote Control Unit. Maximum operating range is 16.4’ (5m).
	Make sure the code of the Remote Control is set to conform to the
		projector. (See “SETTING” section on page 36, 37.)
Wireless Mouse function does	•	Check the cable connection between the projector and the computer.
not work.	•	Check the mouse setting on your computer.
		•	Turn the projector on before you turn on the computer.

WARNING:

High voltages are used to operate this projector. Do not attempt to open the

cabinet.

If the problem still persists after following all operating instructions, contact the sales dealer where you

purchased the projector or the service center. Give the model number and explain the difficulty. We will advise you how to obtain service.

This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty and electrical hazards.

43