LC-XC1
10
ADJUSTABLE FEET
Picture tilt and projection angle can be adjusted by rotating the ADJUSTABLE FEET. Projection angle can be
adjusted to 9.0 degrees.
1
Lift the front of the projector and pull the FEET LOCK
LATCHES on both sides of the projector.
2
Release the FEET LOCK LATCHES to lock the
ADJUSTABLE FEET and rotate the ADJUSTABLE FEET
to fine tune the position and the tilt.
3
To shorten the ADJUSTABLE FEET, lift the front of the
projector and pull and undo the FEET LOCK LATCHES.
The position and the keystone distortion of the image can
be adjusted using the Menu Operation. (Refer to P 22,
31 and 35.)
MOVING THE PROJECTOR
Use the Carry Handle when moving the Projector. When
moving the projector, replace the lens cover and retract the
feet to prevent damage to the lens and cabinet.
When this projector is not in use for an extended period, put it
into the case (dust cover) supplied with this projector.

CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR

• Do not drop or bump the projector, otherwise damages or malfunctions may result.
• When carrying the projector, use a suitable carrying case.
• Do not transport the projector by using a courier or transport service in an unsuitable transport
case. This may cause damage t o the projector. To transport the projector through a co urier or
trans
p
ort service, consult
y
our dealer for best wa
y
.