6Chapter 1 Introduction
Chapter 1 Introduction
Thank you very much for choosing an EIZO Color Monitor.

1-1. Features

24” wide format LCD
Wide color gamut of 98% of Adobe RGB
[Resolution] 1920 dots x 1200 lines
HDCP (High-bandwidth Digital Cont ent Interface)
Frame Synchronous mode supported (23.75 - 30.5Hz, 47.5 - 61Hz)
Applicable to DisplayPort (applicable to 8 bit or 10 bit, not applicable to audio signals)
3 signal input terminals ( DVI-I x 2, DisplayPort x 1)
Color Mode function reproduces color gamut and gam ma compliant with [EBU/REC.709/SMPTE-C]
broadcasting standard s as well as the [DCI] digital cinema stand ard
“2-3. To select the display mode (Color Mode)” (page 18)
Attaching the “Adjustment Certicate” to des cribe the grayscale and uniformit y characteristics of the
monitor individually
Portrait/Landscape d isplay available (rotate 90 degrees clockwise
Monitor hood attached
The provided “ColorNavigator” calibration software ena bles you to calibrate monitor characterist ics
and generate color proles
“1-3. Utility Disk” (page 8)
Color Vision Deciency Simulation Software "UniColor Pro" supported
This software can be dow nloaded from http://www.eizo.com
Power saving function
This product is equipped w ith power saving function.
Power Consumption when main power switch is Off: 0W
Equipped with main power sw itch.
Turning off the main power switch complet ely shuts off power supply to the monitor while the mon itor is not
used.
Auto EcoView function
The sensor on the front side of the monit or detects the environme ntal brightness to adjust t he screen brightness
automatically and comfort ably.
Excessively high brightness may lead a d amage to the natural env ironment as well as to your eyes. Suppres sing
the excessively high brightness wi ll be helpful to reduce the power consu mption and the damage to your eye s.
“4-3. Setting Monitor’s Automatic Brightness Adjustme nt” (page 30)
NOTE
This monitor support s the Portrait/Land scape display. This function allows you to cha nge the orientation of the
Adjustment menu when using the monit or screen in vertical dis play position. (Refer to “To set the orientation of
the Adjustment menu [Orientation]” on page 26.)
For using the monitor with “Portr ait” position, the graph ics board supporting por trait display is requir ed. When
using the monitor with “Port rait” position, the sett ing needs to be changed depe nding on the graphics boar d used
in your PC. Refer to the manual of the gr aphics board for details.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
-
-