7-2. Attaching the Stand base

The once removed the Stand base can be attached to the monitor again with the following procedures.

Procedure

1. Lay the LCD monitor on a soft cloth spread over on a stable surface with the panel surface facing down.

2.Attach the Stand base.

Hold the Stand base with the arrow “ ” facing upward, align the two holes (a) of the Stand base with the two tabs (b) at the bottom of the monitor, and snap the tabs into the holes.

b

a

3.Turn the supplied screw in the “LOCK” direction to lock the Stand base.

Tighten screw, then press knob flat.

7-3. Displaying Monitor Information “Information”

This function allows you to display the model name, serial number, usage time, resolution, and input signal.

Procedure

1.Choose “Information” in the Setting menu, and press .

The “Information” menu appears.

Attention

• The usage time is not always “0” when you purchase the monitor due to factory inspection.

Chapter 7 Reference 43

Page 43
Image 43
Eizo FS2332 user manual Attaching the Stand base, Displaying Monitor Information Information