English

11. REFERENCE

11-1. Attaching an Arm Stand

The eClient can be used with an arm stand by removing the tilt stand and attaching the arm stand to the terminal.

NOTE

•Use an arm stand that satisfies the following.

-When using the eClient with an arm stand, the arm stand must be VESA approved :

Use an arm stand with a 75 mm x 75 mm hole spacing on the arm mounting pad. Use an arm stand that is able to support an object weighing 8.0 kg.

A GS approved arm stand.

-Use an arm stand with sufficient stability (mechanical firmness) to support the weight of the monitor.

-Use an arm stand remaining that position where it is manually moved.

-Use an arm stand with the ability to tilt the monitor forward and backward.

•Please connect cables after attaching an arm stand.

Setup Procedure

1. Lay the eClient down as shown below. Do not scratch the panel.

2. Remove the stand by loosening the screws (M4 x 16 mm).

100 11. REFERENCE