English
6. IP address setting page is displayed.
[Yes, use the IP information supplied by DHCP.]
...................................Select this when using DHCP service. All the
necessary information of the eClient including the IP address will be obtained by the DHCP.
[No, I will enter static IP information.]
...................................Select this when not using DHCP service. Enter the IP
address of the eClient.
If DHCP service is not in operation, following message appears.
Type a [Terminal Name] for connection to a WTS by the RDP (Microsoft Remote Desktop Client) protocol.
[Terminal Name] ................ | Type the name to identify this unit on the network. |
Click [Next>].
Refer to step 8 if you select [Yes, use the IP information supplied by DHCP.] Refer to step 7 if you select [No, I will enter static IP information.]
16 3. SETTING UP THE eClient